HP Pavilion TouchSmart 14-f000 HP Pavillion Sleekbook 14 Maintenance and Servi - Page 48

Hard drive, the computer on, and then shut it down through the operating system.

Page 48 highlights

5. Remove the TouchPad button board (4). Reverse this procedure to install the TouchPad button board. Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part number 725626-001. Description 1-TB, 5400-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 640-GB, 5400-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5-mm 320-GB, 5400-rpm, 9.5-mm Spare part number 676521-001 634250-001 669300-001 669299-001 622643-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30). 38 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91

5.
Remove the TouchPad button board
(4)
.
Reverse this procedure to install the TouchPad button board.
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, hard drive connector
cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part number
725626-001.
Description
Spare part number
1-TB, 5400-rpm, 9.5-mm
676521-001
750-GB, 5400-rpm, 9.5-mm
634250-001
640-GB, 5400-rpm, 9.5-mm
669300-001
500-GB, 5400-rpm, 9.5-mm
669299-001
320-GB, 5400-rpm, 9.5-mm
622643-001
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
30
).
38
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts