HP Pavilion TouchSmart 14-f000 HP Pavillion Sleekbook 14 Maintenance and Servi - Page 51

USB board, Remove Phillips PM2.5×5.6 screw

Get HP Pavilion TouchSmart 14-f000 PDF manuals and user guides View all HP Pavilion TouchSmart 14-f000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

USB board Description USB board (includes cable) Spare part number 726204-001 Before removing the USB board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the keyboard (see Keyboard on page 31). 6. Remove the top cover (see Top cover on page 33). Remove the USB board: 1. Release the ZIF connector (1) to which the USB cable is attached, and then disconnect the USB cable from the system board. 2. Remove Phillips PM2.5×5.6 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3) and cable. Reverse this procedure to install the USB board. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
USB board
Description
Spare part number
USB board (includes cable)
726204-001
Before removing the USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
30
).
5.
Remove the keyboard (see
Keyboard
on page
31
).
6.
Remove the top cover (see
Top cover
on page
33
).
Remove the USB board:
1.
Release the ZIF connector
(1)
to which the USB cable is attached, and then disconnect the USB
cable from the system board.
2.
Remove Phillips PM2.5×5.6 screw
(2)
that secures the USB board to the base enclosure.
3.
Remove the USB board
(3)
and cable.
Reverse this procedure to install the USB board.
Component replacement procedures
41