HP Pavilion TouchSmart 14-f000 HP Pavillion Sleekbook 14 Maintenance and Servi - Page 47
TouchPad button board, Detach the TouchPad button board cable
View all HP Pavilion TouchSmart 14-f000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Reverse this procedure to install the power button board. TouchPad button board Description TouchPad button board (includes bracket, TouchPad button board cable, and TouchPad cable) Spare part number 722909-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the keyboard (see Keyboard on page 31). 6. Remove the top cover (see Top cover on page 33). Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Release the ZIF connector (1) to which the TouchPad board cable is connected, and then disconnect the TouchPad board cable from the TouchPad board. 3. Detach the TouchPad button board cable (2) from the TouchPad. (The TouchPad button board cable is attached to the TouchPad with double-sided tape.) 4. Remove the three screws (3) that secure the TouchPad button board to the top cover. Component replacement procedures 37