HP Pavilion dm1-2000 HP Pavilion dm1 Notebook PC - Maintenance and Service Gui - Page 65
Digital media assembly, Position the computer right-side up
View all HP Pavilion dm1-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Digital media assembly Description Digital media assembly (includes cable) Spare part number 611693-001 Before removing the digital media assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the hard drive cover (see WLAN module on page 38). 6. Remove the hard drive (see Drives on page 44). 7. Remove the keyboard (see Keyboard on page 47). 8. Remove the top cover (see Top cover on page 50). Remove the digital media assembly: 1. Position the computer right-side up, with the front toward you and the display open as far as possible. 2. Disconnect the ZIF digital media assembly cable (1). 3. Remove the PM2.0×3.5 screw (2) that secures the digital media assembly to the base enclosure. 4. Remove the digital media assembly (3). Reverse this procedure to install the digital media assembly. Component replacement procedures 57