HP Pavilion dm1-2000 HP Pavilion dm1 Notebook PC - Maintenance and Service Gui - Page 66
Display assembly, Battery, on WLAN module, Drives, Keyboard, Top cover
View all HP Pavilion dm1-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Display assembly Description 29.5-cm (11.6-in) (1366 × 768) HD BrightView LED display assembly (includes webcam, microphone, nameplate, and logo) Spare part number 608631-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the hard drive cover (see WLAN module on page 38). 6. Remove the hard drive (see Drives on page 44). 7. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 38) and WWAN module (see WWAN module on page 40). 8. Remove the keyboard (see Keyboard on page 47). 9. Remove the top cover (see Top cover on page 50). Remove the display assembly: 1. Position the computer display-side up, with the front toward you. 2. Open the computer as far as possible. 3. Disconnect the display panel/webcam/microphone cable (1) from the system board. 58 Chapter 4 Removal and replacement procedures