HP Pavilion dm1-2000 HP Pavilion dm1 Notebook PC - Maintenance and Service Gui - Page 71
Multi board, Battery, on WLAN module, Drives, Keyboard, Top cover, Display assembly
View all HP Pavilion dm1-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
b. Release the wireless antenna cables (2) from the clips and routing channels built into the left and right sides of the display enclosure, and remove the wireless antenna transceivers and cables. Reverse this procedure to reassemble and install the display assembly. Multi board Description Multi board (includes USB and RJ-45 ports, and cable) Spare part number 611692-001 Before removing the multi board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. hard drive cover (see WLAN module on page 38). b. Hard drive (see Drives on page 44). c. Keyboard (see Keyboard on page 47). d. Top cover (see Top cover on page 50). e. Display assembly (see Display assembly on page 58). Component replacement procedures 63