HP Pavilion dm3-1000 HP Pavilion dm3 Entertainment PC - Maintenance and Servic - Page 45

Removal and replacement procedures Hard drive ✎ The hard drive hardware spare part kit, 580683-001, includes a hard drive connector and hard drive bracket. Description 128-GB SSD (AMD systems) 160-GB SSD (Intel systems) Hard drive hardware kit 500-GB, 7200-rpm hard drive 500-GB, 5400-rpm hard drive 320-GB, 7200-rpm hard drive 320-GB, 5400-rpm hard drive 250-GB, 7200-rpm hard drive 250-GB, 5400-rpm hard drive 160-GB, 7200-rpm hard drive 160-GB, 5400-rpm hard drive Spare part number 581182-001 582077-001 580683-001 580682-001 580679-001 580681-001 580678-001 580680-001 580677-001 581181-001 581181-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the three Phillips PM2.5x5.0 captive screws 1 that secure the hard drive cover to the computer. 3. Lift the right side 2 of the hard drive cover to detach it from the computer. The hard drive cover is included in the Plastics Kit, spare part number 580691-001. Maintenance and Service Guide 4-9