HP Pavilion dm3-1000 HP Pavilion dm3 Entertainment PC - Maintenance and Servic - Page 70
to remove the system board from, the base enclosure.
View all HP Pavilion dm3-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removal and replacement procedures Remove the system board: 1. Disconnect the RJ-45 connector 1 from the enclosure. 2. Disconnect the power connector 2 from the enclosure. 3. Remove the five Phillips 2.5×4.0 screws that secure the system board to the base enclosure. 4. Lift up 1 on the right side of the system board, and then pull it to the right 2 to remove the system board from the base enclosure. Reverse this procedure to install the system board. 4-34 Maintenance and Service Guide
4–34
Maintenance and Service Guide
Removal and replacement procedures
Remove the system board:
1. Disconnect the RJ-45 connector
1
from the enclosure.
2. Disconnect the power connector
2
from the enclosure.
3. Remove the five Phillips 2.5×4.0 screws that secure the system board to the base enclosure.
4. Lift up
1
on the right side of the system board, and then pull it to the right
2
to remove the system board from
the base enclosure.
Reverse this procedure to install the system board.