HP Pavilion dv1700 Hardware and Software Guide - Page 82

Step 3: Recharging the Battery Pack, Start > Control Panel > Performance and, Maintenance

Page 82 highlights

Power 6. Disconnect the computer from the external power source, but do not turn off the computer. 7. Run the computer on battery power until the battery pack is fully discharged. The battery light begins to blink when the battery pack has discharged to a low-battery condition. When the battery pack is fully discharged, the computer is shut down. Step 3: Recharging the Battery Pack 1. Plug the computer into external power until the battery pack is fully recharged and the battery light is turned off. You can use the computer while the battery pack is recharging, but the battery pack will charge faster if the computer is turned off. 2. If the computer is turned off, turn on the computer after the battery pack is fully charged and the battery light is off. 3. Display the settings on the Power Schemes table. To access the Power Schemes tab: Select Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab. 4. Reenter the settings you recorded earlier for the items in the Plugged in column and the Running on batteries column. 5. Click OK. Ä CAUTION: After calibrating the battery pack, reenable hibernation. Failure to reenable hibernation may result in a complete battery discharge and potential information loss. To reenable hibernation: Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. Select the Enable hibernation check box, and then click Apply. 3-28 Hardware and Software Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192

3–28
Hardware and Software Guide
Power
6. Disconnect the computer from the external power source,
but do
not
turn off the computer.
7. Run the computer on battery power until the battery pack is
fully discharged. The battery light begins to blink when the
battery pack has discharged to a low-battery condition. When
the battery pack is fully discharged, the computer is shut
down.
Step 3: Recharging the Battery Pack
1. Plug the computer into external power until the battery pack
is fully recharged and the battery light is turned off.
You can use the computer while the battery pack is
recharging, but the battery pack will charge faster if the
computer is turned off.
2. If the computer is turned off, turn on the computer after
the battery pack is fully charged and the battery light is off.
3. Display the settings on the Power Schemes table. To access
the Power Schemes tab:
Select
Start > Control Panel > Performance and
Maintenance
>
Power Options > Power Schemes
tab.
4. Reenter the settings you recorded earlier for the items in the
Plugged in column and the Running on batteries column.
5. Click
OK
.
Ä
CAUTION:
After calibrating the battery pack, reenable hibernation.
Failure to reenable hibernation may result in a complete battery
discharge and potential information loss. To reenable hibernation:
Select
Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate
tab. Select the
Enable hibernation
check box, and then click
Apply
.