HP Photosmart C5100 Basics Guide - Page 14
Push the input tray back into the HP All-in-One. - will not print sometimes
View all HP Photosmart C5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
HP All-in-One overview 3. Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops. Tip If you are using letterhead, insert the top of the page first with the print side down. For more help on loading full-size paper and letterhead, refer to the diagram engraved in the base of the input tray. 4. Slide the paper-width and paper-length guides inward until they stop at the edges of the paper. Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the paper-width guide. 5. Push the input tray back into the HP All-in-One. 6. Pull the output tray extender toward you, as far as it will go. Flip the paper catch at the end of the output tray extender to open the extender the rest of the way. Note When you use legal-size paper, leave the tray extender closed. Basics Guide 11