HP Photosmart C5100 Basics Guide - Page 34
Contact HP Support. Go to, Original HP ink depleted, Print head assembly is stalled - all in one printer
View all HP Photosmart C5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
www.hp.com/go/anticounterfeit For more information, see: Replace the ink cartridges Original HP ink depleted Cause The original HP ink in the indicated ink cartridge(s) has been depleted. Solution Replace the indicated ink cartridge(s) or press OK on the control panel to continue. HP recommends that you use genuine HP ink cartridges. Genuine HP ink cartridges are designed and tested with HP printers to help you easily produce great results, time after time. Note HP cannot guarantee the quality or reliability of non-HP ink. Printer service or repairs required as a result of printer failure or damage attributable to the use of nonHP ink will not be covered under warranty. For more information, see: Replace the ink cartridges Print head assembly is stalled Cause The print head assembly is blocked. Solution Remove any objects that are blocking the print head assembly. To clear the print head assembly 1. Open the ink cartridge door by lifting from the front center of the device, until the door locks into place. Troubleshooting and support 2. Remove any objects that are blocking the print head assembly, including any packing materials. 3. Turn the HP All-in-One off, then turn it on again. 4. Close the ink cartridge door. Print head failure Cause The print head assembly or the ink delivery system has failed and the HP All-in-One can no longer print. Solution Contact HP Support. Go to: www.hp.com/support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. Printer alignment failed Cause An incorrect type of paper is loaded in the input tray. Basics Guide 31