HP Presario V3600 Compaq Presario V3500 Notebook PC - Maintenance and Service - Page 87
Bluetooth module, Remove the Phillips PM2.5×5.0 screw
View all HP Presario V3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
f. Display assembly (see Display assembly on page 64) g. Top cover (see Top cover on page 70) Remove the audio board: 1. Release the ZIF connector to which the audio board cable is connected and disconnect the cable (1) from the system board. 2. Remove the Phillips PM2.5×5.0 screw (2) that secures the audio board to the computer. 3. Lift the rear edge of the audio board (3) and swing it forward until the audio connectors disengage from the base enclosure. 4. Remove the audio board (4). Reverse the above procedure to install the audio board. Bluetooth module Description Bluetooth module (includes Bluetooth module cable) Spare part number 397923-002 Before removing the Bluetooth module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Component replacement procedures 79