HP Pro 3520 PC Maintenance & Service Guide HP Pro 3520 All-in-One Business - Page 61

Make sure the grommets are not broken or missing before installing the hard drive.

Get HP Pro 3520 PC PDF manuals and user guides View all HP Pro 3520 PC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

4. Lift and grasp the handle on top of the hard drive cage (2) and slide the cage toward the outer edge of the computer, then lift the cage out of the computer (3). 5. Remove the four mounting Phillips screws (1) that secure the drive to the cage. Do not remove the blue rubber grommets behind each screw. They must stay attached to the cage when installing a new hard drive. 6. Slide the hard drive out of the cage (2). To replace the hard drive, reverse the removal procedures. NOTE: Make sure the grommets are not broken or missing before installing the hard drive. Replacement grommets are available using spare part number 709840-001. Attach hard drive conductive tape to one screw hole on each side of the hard drive cage. Conductive tape is available using spare part number 709841-001. Hard Drive 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
4.
Lift and grasp the handle on top of the hard drive cage
(2)
and slide the cage toward the outer
edge of the computer, then lift the cage out of the computer
(3)
.
5.
Remove the four mounting Phillips screws
(1)
that secure the drive to the cage. Do not remove
the blue rubber grommets behind each screw. They must stay attached to the cage when
installing a new hard drive.
6.
Slide the hard drive out of the cage
(2)
.
To replace the hard drive, reverse the removal procedures.
NOTE:
Make sure the grommets are not broken or missing before installing the hard drive.
Replacement grommets are available using spare part number 709840-001.
Attach hard drive conductive tape to one screw hole on each side of the hard drive cage. Conductive
tape is available using spare part number 709841-001.
Hard Drive
53