HP Pro x2 Maintenance and Service Guide - Page 49
Fingerprint reader board, Remove the Philllips PM1.8×2.4 screw
View all HP Pro x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
11. Remove the back cover (4). Reverse this procedure to install the back cover. Fingerprint reader board Description Fingerprint reader board (includes bracket and cable) Spare part number 766612-001 Before removing the fingerprint reader board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 39). Remove the fingerprint reader board: 1. Remove the Philllips PM1.8×2.4 screw (1) that secures the fingerprint reader board and bracket to the back cover. 2. Slide the fingerprint reader board bracket away from the front edge of the back cover, and then remove the bracket (2). Tablet replacement procedures 41