HP Pro x2 Maintenance and Service Guide - Page 53
Solid-state drive, Disconnect the power from the tablet by unplugging the power cord from the tablet.
View all HP Pro x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3. Remove the five Philllips PM2.4×4.6 screws (2) that secure the tablet battery to the display panel assembly. 4. Remove the tablet battery (3). Reverse this procedure to install the tablet battery. Solid-state drive Description 256-GB, M2, SATA-3, solid-state drive 256-GB, M2, SATA-3, SED, OPAL2, solid-state drive 180-GB, M2, SATA-3, solid-state drive 180-GB, M2, SATA-3, SED, OPAL1, solid-state drive 128-GB, M2, SATA-3, solid-state drive 64-GB, M2, SATA-3, solid-state drive Spare part number 766636-001 766637-001 766634-001 766635-001 766633-001 766632-001 Before removing the solid-state drive, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 39). 5. Disconnect the tablet battery cable from the system board (see Tablet battery on page 44). Tablet replacement procedures 45