HP Pro x2 Maintenance and Service Guide - Page 59
RTC battery, Fan, Detach the RTC battery
View all HP Pro x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
RTC battery Description RTC battery (includes cable and double-sided adhesive) Spare part number 766629-001 Before removing the RTC battery, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 39). 5. Disconnect the tablet battery cable from the system board (see Tablet battery on page 44). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the system board. (The RTC battery is attached to the system board with double-sided adhesive.) Fan 3. Remove the RTC battery. Reverse this procedure to install the RTC battery. Description Fan (includes cable) Spare part number 766618-001 Tablet replacement procedures 51