HP Pro x2 Maintenance and Service Guide - Page 69
Power connector cable, Home button board, Remove the Philllips PM1.5×3.5 screw
View all HP Pro x2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Power connector cable Description Power connector cable Spare part number 766608-001 Before removing the power connector cable, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 39). 5. Disconnect the tablet battery cable from the system board (see Tablet battery on page 44). 6. Remove the tablet I/O board (see Tablet I/O board on page 59). Remove the power connector cable: 1. Remove the Philllips PM1.5×3.5 screw (1) that secures the power connector cable to the tablet frame. 2. Remove the power connector cable (2). Reverse this procedure to install the power connector cable. Home button board Description Home button board (includes cable) Spare part number 766620-001 Tablet replacement procedures 61