HP ProBook 4740s HP ProBook 4740s Notebook PC - Maintenance and Service Guide - Page 71
System board, Remove the following components
View all HP ProBook 4740s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4. Lift the battery cable from the computer (3). Reverse this procedure to install the battery cable. System board NOTE: All system board spare part kits include replacement thermal material. Description System board for use in models with 1-GB of discrete graphics memory System board for use in models with 2-GB of discrete graphics memory System board for use in Japan in models with 1-GB of discrete graphics memory Spare part number 683493-001 683494-001 696336-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33). 5. Remove the following components: a. Bottom door (see Bottom door on page 34). b. Hard drive (see Hard drive on page 38) c. Optical drive (see Optical drive on page 36) d. Keyboard (see Keyboard on page 45) Component replacement procedures 63