HP ProDesk 480 G7 PCI Micro Maintenance and Service Guide - Page 35

inch hard drive

Get HP ProDesk 480 G7 PCI Micro PDF manuals and user guides View all HP ProDesk 480 G7 PCI Micro manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

2. Disconnect the 2.5 inch hard drive data cable (2) and 2.5 inch hard drive power cable (3) from the 2.5 inch hard drive. 3. Remove the slotted Torx15 screw (1) that secures the optical drive cage to the primary drive cage. 4. Press and hold the green release lever (2), and then lift the left side of the optical drive cage (3) until it rests at an angle. 5. Remove the optical drive cage (4). To install the optical drive cage, reverse the removal procedure. 2.5 inch hard drive To remove the 2.5 inch hard drive, use these procedures. Table 4-1 2.5 inch hard drive descriptions Description 2 TB, 5400 RPM ENWW 2.5 inch hard drive 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
2.
Disconnect the 2.5 inch hard drive data cable
(2)
and 2.5 inch hard drive power cable
(3)
from the 2.5 inch
hard drive.
3.
Remove the slotted Torx15 screw
(1)
that secures the optical drive cage to the primary drive cage.
4.
Press and hold the green release lever
(2)
, and then lift the left side of the optical drive cage
(3)
until it
rests at an angle.
5.
Remove the optical drive cage
(4)
.
To install the optical drive cage, reverse the removal procedure.
2.5 inch hard drive
To remove the 2.5 inch hard drive, use these procedures.
Table 4-1
2.5 inch hard drive descriptions
Description
2 TB, 5400 RPM
ENWW
2.5 inch hard drive
27