HP ProDesk 480 G7 PCI Micro Maintenance and Service Guide - Page 36

inch primary hard drive

Get HP ProDesk 480 G7 PCI Micro PDF manuals and user guides View all HP ProDesk 480 G7 PCI Micro manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Table 4-1 2.5 inch hard drive descriptions (continued) Description 1 TB, 7200 RPM 500 GB, 7200 RPM 500 GB, 7200 RPM, Federal Information Processing Standards (FIPS) 500 GB, 7200 RPM, self-encrypting drive (SED), OPAL2 NOTE: Before you remove the old 2.5 inch hard drive, be sure to back up the data from the old 2.5 inch hard drive so that you can transfer the data to the new 2.5 inch hard drive. Before removing the 2.5 inch hard drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the access panel (Access panel on page 23). 3. Remove the optical drive (Optical drive on page 24). 4. Remove the front bezel (Front bezel on page 25). 5. Remove the optical drive cage (Optical drive cage on page 26). Remove the 2.5 inch hard drive: 1. Remove the four Torx15 screws (1) that secure the 2.5 inch hard drive to the optical drive cage. 2. Remove the 2.5 inch hard drive (2) from the optical drive cage. To install the 2.5 inch hard drive, reverse the removal procedure. 3.5 inch primary hard drive To remove the 3.5 inch primary hard drive, use these procedures. 28 Chapter 4 Removal and replacement procedures ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
Table 4-1
2.5 inch hard drive descriptions (continued)
Description
1 TB, 7200 RPM
500 GB, 7200 RPM
500 GB, 7200 RPM, Federal Information Processing Standards (FIPS)
500 GB, 7200 RPM, self-encrypting drive (SED), OPAL2
NOTE:
Before you remove the old 2.5 inch hard drive, be sure to back up the data from the old 2.5 inch hard
drive so that you can transfer the data to the new 2.5 inch hard drive.
Before removing the 2.5 inch hard drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
23
).
2.
Remove the access panel (
Access panel
on page
23
).
3.
Remove the optical drive (
Optical drive
on page
24
).
4.
Remove the front bezel (
Front bezel
on page
25
).
5.
Remove the optical drive cage (
Optical drive cage
on page
26
).
Remove the 2.5 inch hard drive:
1.
Remove the four Torx15 screws
(1)
that secure the 2.5 inch hard drive to the optical drive cage.
2.
Remove the 2.5 inch hard drive
(2)
from the optical drive cage.
To install the 2.5 inch hard drive, reverse the removal procedure.
3.5 inch primary hard drive
To remove the 3.5 inch primary hard drive, use these procedures.
28
Chapter 4
Removal and replacement procedures
ENWW