HP ProDesk 480 G7 PCI Micro Maintenance and Service Guide - Page 47
WLAN module
View all HP ProDesk 480 G7 PCI Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2. Pull the drive out of the system board connector (2). To install the solid-state drive module, reverse the removal procedure. NOTE: Solid-state drive modules are designed with a notch to prevent incorrect insertion. WLAN module To remove the WLAN module, use these procedures. Table 4-5 WLAN module descriptions Description WLAN Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5.0 non-vPro WW WLAN Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5.0 vPro WW WLAN Realtek RTL8821CE ac 1×1 + Bluetooth 4.2 WW WLAN Realtek RTL8822CE ac 2×2 + Bluetooth 5.0 M.2 2230 WW The WLAN module is located near the memory modules. NOTE: WLAN module appearance can vary. Before removing the WLAN module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the access panel (Access panel on page 23). 3. Remove the optical drive (Optical drive on page 24). 4. Remove the front bezel (Front bezel on page 25). 5. Remove the optical drive cage (Optical drive cage on page 26). Remove the WLAN module: ENWW WLAN module 39