HP ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 31
Top Access Panel, Table 2-3, Module and Bay Components
![]() |
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-8 Compaq ProLiant 8500 Server Maintenance and Service Guide Table 2-3 Module and Bay Components continued Module Contents Processor and Processor bus/core ratio switches memory module Cache Accelerator Memory (DIMMs) Media module Hard drive bays CD-ROM/diskette drives Hot-pluggable hard drives To Access Remove processor and memory module. Remove processor and memory module. Open processor and memory module. Remove memory board. Remove media module. Access directly at front of server. Top Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: When the server is powered on, the access panel must be installed for proper system cooling. Otherwise, component stress and permanent equipment damage may result. The top access panel is opened to access the PCI Hot Plug expansion slots, system fans, and configuration switches. To open the top access panel: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Insert the access tool (Torx T-15 screwdriver or equivalent) into the access lock (if locked) and turn the tool counter-clockwise . 1 2 Figure 2-3. Opening the access lock
![](/manual_guide/products/hewlettpackard-proliant-8500-proliant-8500-servers-maintenance-service-guide-083d638/31.png)