HP ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 70
I/O Module Central Support Bracket, Remove the bracket
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Removal and Replacement Procedures 2-47 I/O Module Central Support Bracket To remove the I/O module central support bracket: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the I/O module. See the sections on removing the I/O modules earlier in this chapter. 3. Remove the fan cage assembly. See "Fan Cage Assembly" earlier in this chapter. 4. Loosen the thumbscrew securing the bracket to the chassis . 5. Remove the bracket . 2 1 Figure 2-39. Removing the I/O module central support bracket Reverse steps 1 through 5 to replace the I/O module central support bracket.
Removal and Replacement Procedures
2-47
I/O Module Central Support Bracket
To remove the I/O module central support bracket:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Remove the I/O module. See the sections on removing the I/O modules earlier in this
chapter.
3.
Remove the fan cage assembly. See
“
Fan Cage Assembly
”
earlier in this chapter.
4.
Loosen the thumbscrew securing the bracket to the chassis
.
5.
Remove the bracket
.
2
1
Figure 2-39.
Removing the I/O module central support bracket
Reverse steps 1 through 5 to replace the I/O module central support bracket.