HP ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 77
Pull the switch assembly out of the power switch plate
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2-54 Compaq ProLiant 8500 Server Maintenance and Service Guide 8. Remove the power switch plate from the media module . 3 Figure 2-47. Removing the power switch plate from the media module 9. Squeeze the grommets around the LEDs, and remove the LEDs from the grommets. Remove the thermistor from the bracket assembly . 10. Pull the switch assembly out of the power switch plate . 4 5 4 Figure 2-48. Removing the Power On/Standby switch from the power switch plate Reverse steps 1 through 10 to replace the Power On/Standby switch assembly. NOTE: The Power On/Standby switch LED is in the top position, and the thermistor is in the bottom position.
2-54
Compaq ProLiant 8500 Server Maintenance and Service Guide
8.
Remove the power switch plate from the media module
.
3
Figure 2-47.
Removing the power switch plate from the media module
9.
Squeeze the grommets around the LEDs, and remove the LEDs from the grommets.
Remove the thermistor from the bracket assembly
.
10.
Pull the switch assembly out of the power switch plate
.
4
4
5
Figure 2-48.
Removing the Power On/Standby switch from the power switch plate
Reverse steps 1 through 10 to replace the Power On/Standby switch assembly.
NOTE:
The Power On/Standby switch LED is in the top position, and the thermistor is in the bottom
position.