HP ProLiant 8500 ProLiant 8500 Servers Maintenance and Service Guide - Page 75
System Midplane Assembly, Hot-Pluggable Power
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
2-52 Compaq ProLiant 8500 Server Maintenance and Service Guide System Midplane Assembly To remove the system midplane assembly: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Open the top access panel. See "Top Access Panel" earlier in this chapter. 3. Remove and disconnect all modules and power supplies. See sections on removing the I/O module, "Media Module," "Processor and Memory Module," and "Hot-Pluggable Power Supply" earlier in this chapter. 4. Loosen the two thumbscrews securing the system midplane assembly to the chassis . 5. Remove the board from the chassis . 1 2 Figure 2-45. Removing the system midplane assembly Reverse steps 1 through 5 to replace the system midplane assembly.
2-52
Compaq ProLiant 8500 Server Maintenance and Service Guide
System Midplane Assembly
To remove the system midplane assembly:
1.
Perform the preparation procedures. See
“
Preparation Procedures
”
earlier in this chapter.
2.
Open the top access panel. See
“
Top Access Panel
”
earlier in this chapter.
3.
Remove and disconnect all modules and power supplies. See sections on removing the I/O
module,
“
Media Module,
”
“
Processor and Memory Module,
”
and
“
Hot-Pluggable Power
Supply
”
earlier in this chapter.
4.
Loosen the two thumbscrews securing the system midplane assembly to the chassis
.
5.
Remove the board from the chassis
.
1
2
Figure 2-45.
Removing the system midplane assembly
Reverse steps 1 through 5 to replace the system midplane assembly.