HP ProLiant SL165z HP ProLiant SL165z G6 Server Maintenance and Service Guide - Page 42
To install the PCIe X16 riser card to the bracket
View all HP ProLiant SL165z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Figure 19 Removing the PCIe riser card from bracket. To install the PCIe X16 riser card to the bracket: 1. Align the riser card with the bracket. 2. Fasten the two screws to secure the riser card to the bracket. Figure 20 Installing PCIe riser card to the bracket To install the riser card with the bracket into the motherboard: 1. Align the riser card connector with the slot on the motherboard and then insert the assembly into the slot. 2. Fasten the screw to secure the bracket to the chassis. Removal and Replacement Procedures 42
Removal and Replacement Procedures
42
Figure 19
Removing the PCIe riser card from bracket.
To install the PCIe X16 riser card to the bracket:
1.
Align the riser card with the bracket.
2.
Fasten the two screws to secure the riser card to the bracket.
Figure 20
Installing PCI
e
riser card to the bracket
To install the riser card with the bracket into the motherboard:
1.
Align the riser card connector with the slot on the motherboard and then insert the assembly into
the slot.
2.
Fasten the screw to secure the bracket to the chassis.