HP Spectre 13-v100 Maintenance and Service Guide - Page 34

Battery, built into the battery.

Get HP Spectre 13-v100 PDF manuals and user guides View all HP Spectre 13-v100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Battery Description 4-cell, 38-WHr, 1.66-AHr, Li-ion battery (includes cable) Spare part number 844199-855 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Disconnect the speaker cables from the system board (2), and the release the speaker cables from the routing clips (3) built into the battery. 3. Remove the six Phillips PM2.0×4.0 screws (1) that secure the battery to the computer. 4. Remove the four Phillips PM1.2×2.5 screws (2) that secure the battery to the computer. 5. Pull the black tab in the middle of the battery to disengage the double-sided tape that secures the middle of the battery to the computer (3). 28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Battery
Description
Spare part number
4-cell, 38-WHr, 1.66-AHr, Li-ion battery (includes cable)
844199-855
Before removing the battery, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
26
).
Remove the battery:
1.
Disconnect the battery cable from the system board
(1)
.
2.
Disconnect the speaker cables from the system board
(2)
, and the release the speaker cables from the
routing clips
(3)
built into the battery.
3.
Remove the six Phillips PM2.0×4.0 screws
(1)
that secure the battery to the computer.
4.
Remove the four Phillips PM1.2×2.5 screws
(2)
that secure the battery to the computer.
5.
Pull the black tab in the middle of the battery to disengage the double-sided tape that secures the
middle of the battery to the computer
(3)
.
28
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts