HP Spectre 13-v100 Maintenance and Service Guide - Page 39

Speakers, Remove the Phillips PM2.0×3.0 screw

Get HP Spectre 13-v100 PDF manuals and user guides View all HP Spectre 13-v100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Speakers Description Left speaker Right speaker Spare part number 855634-001 855633-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the speakers: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the right speaker to the computer. 2. Remove the speakers (2) and cables. Reverse this procedure to install the speakers. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Speakers
Description
Spare part number
Left speaker
855634-001
Right speaker
855633-001
Before removing the speakers, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
26
).
5.
Remove the battery (see
Battery
on page
28
).
Remove the speakers:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the right speaker to the computer.
2.
Remove the speakers
(2)
and cables.
Reverse this procedure to install the speakers.
Component replacement procedures
33