HP Spectre 13-v100 Maintenance and Service Guide - Page 40

TouchPad board, Remove the TouchPad board

Get HP Spectre 13-v100 PDF manuals and user guides View all HP Spectre 13-v100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

TouchPad board Description TouchPad board Spare part number 855632-001 Before removing the TouchPad board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the TouchPad board: 1. Disconnect the TouchPad board cable from the system board (1). 2. Remove the three Phillips PM2.0×3.0 screws (2) that secure the TouchPad board to the computer. 3. Remove the TouchPad board (3). Reverse this procedure to install the TouchPad board. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
TouchPad board
Description
Spare part number
TouchPad board
855632-001
Before removing the TouchPad board, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
26
).
5.
Remove the battery (see
Battery
on page
28
).
Remove the TouchPad board:
1.
Disconnect the TouchPad board cable from the system board
(1)
.
2.
Remove the three Phillips PM2.0×3.0 screws
(2)
that secure the TouchPad board to the computer.
3.
Remove the TouchPad board
(3)
.
Reverse this procedure to install the TouchPad board.
34
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts