HP StorageWorks 1510i HP StorageWorks 1510i Modular Smart Array maintenance an - Page 63
Remove the SCSI I/O modules, Remove the power supply modules, Remove the controllers
![]() |
View all HP StorageWorks 1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Remove the SCSI I/O modules 1. Lift the port-colored latch and pull the module out of the chassis. 2. Remove all other SCSI I/O modules or blanks. Remove the power supply modules 1. Press the port-colored latch towards the side of the module and pull the module out of the chassis. 2. Remove the other module. Remove the controllers 1. Press the controller thumb latch to release the latch handle, and then rotate the latch handle out. 1510i Modular Smart Array maintenance and service guide 63
![](/manual_guide/products/hewlettpackard-storageworks-1510i-hp-storageworks-1510i-modular-smart-array-maintenance-service-guide-383072002-2008-de4cbe7/63.png)
Remove the SCSI I/O modules
1.
Lift the port-colored latch and pull the module out of the chassis.
2.
Remove all other SCSI I/O modules or blanks.
Remove the power supply modules
1.
Press the port-colored latch towards the side of the module and pull the module out of the chassis.
2.
Remove the other module.
Remove the controllers
1.
Press the controller thumb latch to release the latch handle, and then rotate the latch handle out.
1510i Modular Smart Array maintenance and service guide
63