HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager user guide - Page 143
Configuring Zoning through the HAFM, Using the Zoning Library, Zoning Library dialog box
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Fabric Zoning Configuring Zoning through the HAFM This section provides procedures for using the menu options available through the HAFM Fabrics tab to configure and manage zoning. For information on other menu options, refer to Chapter 3. To configure new zones and a zone set, then activate a new zone set for the fabric, follow these three steps: 1. Create zones. Follow steps under Configure Zones and Zone Sets on page 146 under "Configuring Zoning through the HAFM." 2. Create a zone set. Follow steps in the "Configure Zones and Zone Sets" section on page 146. 3. Activate the zone set. Follow steps under "Activate Zone Sets" on page 160. Note: Designing zoning can be a complex task, especially for multiswitch fabrics. You should obtain help from HP's professional services organization before configuring zoning. Using the Zoning Library Open the Zoning Library dialog box in either the Products or Fabrics tab by choosing Zoning Library from the Configure menu on the menu tab. Figure 55: Zoning Library dialog box High Availability Fabric Manager User Guide 143