HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager user guide - Page 160
Activate Zone Sets, Activate Zone Set dialog box, Con Fabrics, Fabric Tree
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Fabric Zoning Activate Zone Sets Choose the Activate Zone Set option from the Configure menu on the HAFM menu bar to activate a zone set to control access between devices in a fabric. Only one zone set in the fabric can be active at one time. Activating a zone set replaces the current active zone set with the one you activate. Note that changing the configuration for an active zone set does not dynamically apply changes. For any change to a zone set, even modifying members in a zone that belongs to a zone set, activate the zone set using the following steps. Note: It is not necessary to deactivate the active zone set before activating a new zone set. 1. Choose the Fabrics tab. 2. Choose the fabric in the Fabric Tree area for which the zone set is to be activated. 3. Open the Activate Zone Set dialog box (Figure 64) by choosing Configure > Activate Zone Set. The dialog box displays all zone sets currently configured for the fabric. Figure 64: Activate Zone Set dialog box 4. Click a zone set to select it. 5. Click Next to begin the activation. 160 High Availability Fabric Manager User Guide
![](/manual_guide/products/hewlettpackard-316095b21-fw-050100-sw-070100-hafabric-manager-user-guide-5acbe69/160.png)