HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager user guide - Page 178
Configuration Procedure, Con FICON Management Server dialog box
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Optional Features Configuration Procedure To configure the FICON management server, use the following steps: 1. Choose Configure > Management Server from the Product Manager window. The Configure FICON Management Server dialog box displays (Figure 73). Figure 73: Configure FICON Management Server dialog box 2. Enable or disable the management server by clicking Enable Management Server check box. (To disable the management server, click the check box again to remove the check mark.) 3. Enable or disable switch clock alert mode by clicking the Director Clock Alert Mode check box. When a check mark displays, the alert mode is enabled. 4. Allow or prohibit host control by clicking the check box in the Host Control Prohibited field. When a check mark displays, host control is prohibited. 5. Allow or prohibit offline state control by clicking the check box in the Programmed offline state control field. When a check mark displays, programmed control of the offline state is allowed. 6. Enable or disable Active=Saved mode by clicking the check box in the Active=Saved field. When a check mark displays, the Active=Saved mode is enabled. 7. If necessary, choose a code page from the Code Page drop-down list. 8. Activate changes and close the dialog box by clicking the Activate button. 9. If you are finished configuring the switch, back up the configuration data. 178 High Availability Fabric Manager User Guide
![](/manual_guide/products/hewlettpackard-316095b21-fw-050100-sw-070100-hafabric-manager-user-guide-5acbe69/178.png)