HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager user guide - Page 183
Enable/Disable Switch Binding, Switch Binding State Change dialog box
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Optional Features Enable/Disable Switch Binding Use the following procedure to enable and disable switch binding: 1. Choose the Configure > Switch Binding > Change State from the Product Manager window. The Switch Binding State Change dialog box displays (Figure 75). Figure 75: Switch Binding State Change dialog box 2. Perform one of the following steps: ■ To disable Switch Binding (a check mark displays in the Enable Switch Binding check box), click the Enable Switch Binding check box to remove the check mark, then click Activate. ■ To enable Switch Binding (check mark is not in the Enable Switch Binding check box), click the Enable Switch Binding check box to add a check mark. Go on to step 3 to set the Connection Policy. 3. Click one of the Connection Policy options. ■ Restrict E_Ports - Select if you want to restrict connections from specific switches to switch E_Ports. Switch WWNs can be added to the Switch Membership List to allow connection and removed from the Membership List to prohibit connection. Devices are allowed to connect to any F_Port. ■ Restrict F_Ports - Select if you want to restrict connections from specific devices to switch F_Ports. Device WWNs can be added to the Switch Membership List to allow connection and removed from the Membership List to prohibit connection. Switches are allowed to connect to any E_Port. High Availability Fabric Manager User Guide 183