HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager user guide - Page 199
Product Manager, Cancel, Login, Con Operating, Table 9
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Information and Error Messages Table 9: High Availability Fabric Manager Messages (Continued) Message Click OK to remove all contents from log. Connection to HAFM server lost. Click OK to exit application. Connection to HAFM server lost. Could not export log to file. Default zoning is not supported in Open Fabric Mode. Device is not a member of a zone in the active zone set. Download complete. Click OK and restart the HAFM. Duplicate community names require identical write authorizations. Description This action deletes all contents from the selected log. The HAFM application at a remote workstation lost the network connection to the HAFM server. The connection to the remote HAFM server has been lost. A log file input/output (I/O) error occurred and the file could not be saved to the specified destination. The disk may be full or write protected. A default zone cannot be enabled when the product is enabled for Open Fabric mode. Open Fabric mode does not support zone members defined by port numbers. The selected device is not a member of a zone in the active zone set and therefore cannot communicate with the other device in the route. Download of the HAFM and Product Manager applications is complete. If configuring two communities with identical names, they must also have identical write authorizations. Action Click OK to delete the log contents or Cancel to cancel the operation. Re-start the HAFM application to connect to the HAFM server. Log in to the HAFM server again through the HAFM Login dialog box. If the disk is full, use another disk. If the disk is write protected, change the write-protect properties or use another disk. Change the interop mode from Open Fabric mode to Homogeneous Fabric mode through the Configure Operating Mode dialog box in the Product Manager application. Or, redefine zone members by the WWN of attached devices. Enable the default zone or activate a zone set containing the member before attempting to show the route. Restart the HAFM application to continue. Verify that both communities with the same name have the same write authorizations. High Availability Fabric Manager User Guide 199
![](/manual_guide/products/hewlettpackard-316095b21-fw-050100-sw-070100-hafabric-manager-user-guide-5acbe69/199.png)