HP StorageWorks 2000s NAS 2000s Install Guide - Page 19

Table 3: Configuration Information Part A: To Be completed for DHCP and non-DHCP configurations Server Host Name: Integrated Lights-Out Name: Integrated Lights-Out Default User: Integrated Lights-Out Password: Note: If NIC teaming is to be implemented, determine which ports will be teamed. Configure these Ethernet ports for DHCP protocol. For more information, refer to the Ethernet teaming features and procedures section of administrative procedures in the administration guide. Part B: To be completed for non-DHCP configurations only DNS Servers IP Address 1 2 3 NAS NIC Port* IP Address Subnet Mask Gateway Address NIC 1 NIC 2 Integrated Lights-Out Eth port * The default NAS 2000s has two Ethernet ports available for network connectivity. Disable ports that will not be used. Each Ethernet port must be configured with a separate subnet. Part C: SNMP Information (optional) Trap Destination (IP Address) Manager Client: Management Traps Community String: System Management Community String: NAS 2000s Installation Guide 19