HP StorageWorks 2000s NAS 2000s Install Guide - Page 30
Con Storage, Creating Disk Arrays
![]() |
View all HP StorageWorks 2000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configure Storage Configure storage by creating disk arrays, logical disks, and volumes. Physical disks can be arranged as RAID arrays for fault tolerance and enhanced performance, then segmented into logical disks of appropriate sizes for particular storage needs. These logical disks then become the volumes which appear as drives on the NAS server. Creating Disk Arrays To create disk arrays using the Array Configuration Utility (ACU) on the WebUI's Disks tab: 1. Click the Disks tab and select Array Configuration Utility. 2. Click Yes in the Security Alert dialog to accept the security certificate. 3. Log in as an administrator. Note: The default login for the ACU is administrator and the password is administrator. 4. The ACU session will run in a new browser window. 5. Select the proper array controller in the left pane of the interface. Some NAS systems are equipped with separate array controllers for internal and external storage. Note: Consult the help available in ACU for details on creating arrays, if necessary. 6. Select Create Array from the task list on the right panel. 7. Select the physical drives on which you want to create an array and click OK. Note: Do not modify Array A off of the Smart Array 5i controller in the embedded slot; it contains the NAS operating system. 30 NAS 2000s Installation Guide
![](/manual_guide/products/hewlettpackard-345646001-nas-2000s-install-guide-b368ba2/30.png)