HP StorageWorks 4/256 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-0 - Page 219
EM-1028, Probable Cause, chassisConfig, Recommended, Action, Severity, Message
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
22 EM-1028 Probable Cause Indicates that the current chassisConfig option is not supported by the firmware on the standby control processor (CP). This is true even if the standby comes up and appears to be operational. High availability (HA) synchronization of the CPs will not be allowed. Recommended Either change the chassisConfig option to 1 with the chassisConfig command, or upgrade the Action firmware on the standby to the version running on the active CP. Severity WARNING EM-1028 Message , [EM-1028], , FFDC, WARNING, , HIL Error: failed to access history log for FRU: (rc=). Probable Cause Indicates a problem accessing the data on the world wide name (WWN) card field-replaceable unit (FRU) or the WWN card storage area on the main logic board. The problems were encountered when the software attempted to write to the history log storage to record an event for the specified FRU. The return code is for internal use only. This can indicate a significant hardware problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch. If the message still persists, replace the WWN card, or the switch (for nonbladed switches). Severity WARNING EM-1029 Message , [EM-1029], ,, WARNING, , , a problem occurred accessing a device on the I2C bus (). Operational status () not changed, access is being retried. Probable Cause Indicates that the I2C bus had problems and a timeout occurred. Recommended Action This is often a transient error. Watch for the EM-1048 message, which indicates that the problem has been resolved. If the error persists, check for loose or dirty connections. Remove all dust and debris prior to reseating the field-replaceable unit (FRU). If it continues to fail, replace the FRU. Severity WARNING EM-1031 Message , [EM-1031], ,, ERROR, , ejector not closed. Fabric OS Message Reference 149 53-1001338-01