HP StorageWorks 4/256 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-0 - Page 328
FICU-1010, Indicates that the Fibre Connectivity FICON Management Server mode
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
36 FICU-1010 FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode (fmsMode) was not enabled because the specified port which has an address conflict with the CUP management port is in use. Recommended Use the portDisable command to disable the specified port to avoid the port address conflict. Action Severity WARNING FICU-1011 Message , [FICU-1011], ,, INFO, , FMS mode has been enabled. Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode has been enabled. Recommended No action is required. Action Severity INFO FICU-1012 Message , [FICU-1012], ,, INFO, , FMS mode has been disabled. Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode has been disabled. Recommended No action is required. Action Severity INFO FICU-1013 Message , [FICU-1013], ,, WARNING, , Host data file cannot be resetted to proper size. Probable Cause Indicates that the file system is too full to create a host data file of the proper size. Recommended Create additional room in the file system and initiate a warm recovery. Action Severity WARNING 258 Fabric OS Message Reference 53-1001338-01