HP StorageWorks 4/256 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-0 - Page 467
ICPD System Messages
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 467 highlights
Chapter ICPD System Messages 52 ICPD-1001 Message , [ICPD-1001], ,, ERROR, , Failed to allocate memory: (). Probable Cause Indicates that the specified function failed to allocate memory. Recommended Action Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. Severity ERROR ICPD-1002 Message , [ICPD-1002], ,, ERROR, , Failed to initialize rc = . Probable Cause Indicates that an initialization of a module within the ICPD failed. Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference for more information on this command. Severity ERROR ICPD-1003 Message , [ICPD-1003], ,, INFO, , iSCSI configuration has been committed by switch (). Probable Cause Indicates the iSCSI configuration has been committed by a remote switch in the fabric. Recommended No action is required. Action Severity INFO ICPD-1004 Message Probable Cause , [ICPD-1004], ,, WARNING, , iSNS Client service is detected on multiple switches in fabric. Indicates the iSNS Client service is enabled on multiple switches in the fabric. Fabric OS Message Reference 397 53-1001338-01