HP StorageWorks 4/256 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-0 - Page 435
HAM-1007, Recommended, Action, supportSave, Severity, Message, Probable Cause
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 435 highlights
43 HAM-1007 Recommended Action The standby CP will take over and reset the active CP. The system will be non-redundant as the standby becomes the active CP. Run the supportSave command and contact your switch service provider. Severity CRITICAL HAM-1007 Message , [HAM-1007], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, ,Need to reboot the system for recovery, reason: . Probable Cause Indicates that the system in current condition needs to be rebooted to achieve a reliable recovery. The reasons can be that the standby CP is not ready when failover occurred, failover happened when the last LS transaction is incomplete, or the system failed when a timeout occurred at certain stage or cold/warm recovery failed. If auto-reboot is enabled, the system will automatically reboot itself. Otherwise you need to manually reboot it. Recommended For a reliable recovery, reboot the system manually if auto-reboot recovery is disabled. Run the Action supportSave command and contact your switch service provider. Severity CRITICAL HAM-1008 Message , [HAM-1008], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, ,Rebooting the system for recovery - auto-reboot is enabled. Probable Cause Indicates that recovery by reboot is enabled, the system will automatically reboot itself. This follows if the event logged in 1007 has happened and auto-reboot is enabled. Recommended No action is required. Action Severity CRITICAL HAM-1009 Message , [HAM-1009], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, ,Need to MANUALLY REBOOT the system for recovery auto-reboot is disabled. Probable Cause Indicates that recovery by reboot is disabled, the system needs to be manually rebooted for recovery. This follows if the event logged in 1007 has happened and auto-reboot is disabled. Recommended Reboot the whole system manually to recover. Run the supportSave command and contact your Action switch service provider. Severity CRITICAL Fabric OS Message Reference 365 53-1001338-01