HP StorageWorks 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 102
AG-1026, Message, Probable Cause, Recommended, Action, supportFtp, supportSave, Severity
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
2 AG-1026 AG-1026 Message , [AG-1026], ,, WARNING, , Unable to handle the login request on port due to insufficient resources. Probable Cause Indicates there are insufficient resources. Recommended Action Run configure CLI on AG switch and increase the number of allowed logins on this port. If the message persists, run the supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1027 Message , [AG-1027], ,, WARNING, , Unable to handle this login request on port because NPIV capability is not enabled on this port. Probable Cause Indicates NPIV is not enabled. Recommended Run the portcfgnpivport CLI command on the AG switch and enable the NPIV capability on this port. Action Severity WARNING AG-1028 Message , [AG-1028], ,, WARNING, , Device with Port WWN tried to perform fabric login through port , without having access permission. Probable Cause Indicates the device does not have login access for that port, as per ADS policy set by the user. Recommended Add the device in to the ADS allow list for that port using the ag --adsadd command. Action Severity WARNING AG-1029 Message , [AG-1029], ,, WARNING, , Port Group has ports going to different fabrics. Probable Cause Indicates a misconfiguration. Recommended Connect all ports in the port group to the same fabric. Action 32 Fabric OS Message Reference 53-1001338-01