HP StorageWorks 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 507
MS-1005, Severity, Message, Probable Cause, Recommended, Action, supportFtp, supportSave, memShow
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 507 highlights
69 MS-1005 Severity INFO MS-1005 Message , [MS-1005], ,, ERROR, , MS Invalid CT Response from d= Probable Cause Indicates the management server (MS) received an invalid common transport (CT) response from the switch domain. MS expects either a CT accept IU or a reject IU; the MS received neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS Action information as defined by the FC-GS standard. Severity ERROR MS-1006 Message , [MS-1006], ,, ERROR, , MS Unexpected iu_data_sz= Probable Cause Indicates the management server (MS) received an information unit (IU) data of unexpected size. The IU payload and the IU size might be inconsistent with each other or with the command that is currently being processed. Recommended Action Wait for a few minutes and retry the operation. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MS-1008 Message , [MS-1008], ,, ERROR, , MS Failure while initializing Probable Cause Indicates the management server (MS) failed while initializing the specified action. The following actions might be displayed: • MS is unable to write a message to the MS Extended Link Service Queue. • MS is unable to add a timer to a resource. Recommended Action This message is often transitory. If the error persists, check the available memory on the switch using the memShow command. Severity ERROR Fabric OS Message Reference 437 53-1001338-01