HP Tc2110 hp server tc2110 NOS installation guide (English) - Page 20
Install Additional HP Accessories, Troubleshooting, ipconfig /all - server manual
![]() |
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 3 Installing Microsoft Windows NT 4.0 Server 4. Open a command prompt window on your HP server (Start | Program | Command Prompt) and verify the TCP/IP configuration you have set during Windows NT installation by entering: ipconfig /all 5. To verify the server and clients can communicate properly: a. From one of the clients, open a command prompt and type: ping computername Where computername is the server name you entered during Windows NT installation. You should get four reply's from your new server. If there is a link problem it must be fixed before going any further. You may test the link further by doing a ping between two clients at the same command prompt, type: ping other_client_IPaddress You should get four replies from the second client. b. Copy files back and forth from the clients to the server. Section 7. Install Additional HP Accessories The hp server tc2110 Startup CD includes the drivers for the following HP accessories: · HP-Intel 10/100 LAN · HP NetRAID-1M adapter · HP Surestore DAT24i Please refer to the product manual enclosed with your accessory for the detailed installation procedures. Troubleshooting This section will help you resolve some of the most common installation problems. 14
![](/manual_guide/products/hewlettpackard-tc2110-hp-server-tc2110-nos-installation-guide-english-f85883b/20.png)