HP Tc2110 hp server tc2110 NOS installation guide (English) - Page 52
Perform NetWare 6.0 or SBS 6.0 Installation, PHASE 1 – Start the Installation
![]() |
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 6 Installing Novell NetWare 6.0 and Novell Small Business Suite 6.0 2. Insert your HP Startup CD in a Windows PC and follow the on-screen instructions to create the HP Server tc2110 NetWare SCSI drivers (HP disk NW SCSI). NOTE If the Windows PC does not auto-start the Startup menu, start it by opening Startup.htm found at the root level of the Startup CD. Section 3. Perform NetWare 6.0 or SBS 6.0 Installation The installation of NetWare 6.0 or SBS 6.0 contains several phases: · Phase 1 - Start the Installation · Phase 2 - Install HP Drivers · Phase 3 - Configure the Network PHASE 1 - Start the Installation NOTE If your hard drive contains data or is not new, HP recommends to use a utility such as fdisk to erase all data and partitions from your hard drive. For NetWare 6.0 NOTE The NetWare NOS installation contains a known software error (not product-specific) that does not allow you to boot from CD-ROM. To work around this problem, boot from a DOS diskette and create a bootable DOS partition on the drive. 1. Insert the Novell NetWare 6.0 or SBS 6.0 CD-ROM and boot the system. 2. Press Enter to read the license agreement then press Esc, and select "Accept License Agreement". 3. Press Enter to "Create a New Boot Partition". 4. HP recommends to modify "Size of boot partition" to create a 1000MB boot partition. 46
![](/manual_guide/products/hewlettpackard-tc2110-hp-server-tc2110-nos-installation-guide-english-f85883b/52.png)