HP Tc2110 hp server tc2110 NOS installation guide (English) - Page 55
PHASE 3 – Con the Network, Select Modify if
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 6 Installing Novell NetWare 6.0 and Novell Small Business Suite 6.0 g. The installation program takes a few seconds then automatically adds the HP driver on the driver list. NOTE The new HP driver may show the same device name description but is a more recent version. h. Scroll down and select "Return to driver summary". i. Scroll down and select Continue. 3. The next driver summary screen displays storage and network devices. You can keep the default Network board (LAN) driver and scroll down to select Continue. 4. Wait while system loads the new drivers. 5. Review the Volume SYS and Partition Properties Screen. Select Modify if any changes are necessary, and press the F10 key to save any changes. 6. Select Continue after all changes have been applied. 7. Wait a few minutes while system files are copied and Netware GUI is started. PHASE 3 - Configure the Network The installation proceeds under a graphical interface. NOTE The network settings need to be customized to your environment. Please refer to Novell NetWare manuals should you need further details on the networking setup fields. 1. Enter the server name. 2. Insert the NetWare licensing/cryptographic diskette when prompted, then click Next. 3. Select Free Space and click create. Type in a Volume name and select a Volume Type for the first the partition. Click OK. Click Next to proceed. 4. Choose YES, if necessary to mount all volumes when server reboots. Click Next to proceed. 5. Setup your IP or IPX protocols to match your network environment. NOTE NetWare 6. 0 will not proceed if you don't setup an IP address for at least one of your system network devices (embedded LAN or added PCI card). 49