HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 54
Add Trusted Host, Clear Ntp, Clear Sshkey
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
a. Locate a string that does not appear in the key, to use as the end marker. b. Paste in the SSHKEY string. c. Finish the command with the end marker. Failure to give a proper end marker before and after the certificate might cause the interface to wait for the appropriate end marker indefinitely. • Access level/Bay level: Administrator • Restrictions: o SSHKEY is only available for the Administrator local account o SSHKEY string is limited to 4KB on Onboard Administrator versions prior to 2.30 o SSHKEY string is limited to 8KB on Onboard Administrator version 2.30 and later o This command is only valid in script mode. ADD TRUSTED HOST • Command: ADD TRUSTED HOST • Description: Adds an IP address to the list of systems allowed connectivity with the Onboard Administrator. • Access level /Bay level: OA administrator, OA operator • Restrictions: You can add a maximum of five IP addresses to the IP Manager. The must be in the form where each ### ranges from 0 to 255 (for example, 192.168.1.0). CLEAR NTP • Command: CLEAR NTP {PRIMARY | SECONDARY} • Description: Disables access to the Primary or Secondary NTP server • Access level/Bay level: OA administrator, OA operator • Restrictions: Clearing the Primary NTP server disables NTP. CLEAR SSHKEY • Command: Enclosure network configuration commands 54