HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 65
Set Ntp Primary, Set Ntp Secondary, Set Snmp Contact
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
• Access level/Bay level: OA administrator, OA operator • Restrictions: Poll time should be between 60 and 86,400 seconds. SET NTP PRIMARY • Command: SET NTP PRIMARY • Description: Sets the primary server used for synchronizing time and date using the NTP protocol • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be in the form where each ### ranges from 0 to 255. SET NTP SECONDARY • Command: SET NTP SECONDARY • Description: Sets the secondary server used for synchronizing time and date using the NTP protocol • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be in the form where each ### ranges from 0 to 255 SET SNMP CONTACT • Command: SET SNMP CONTACT "" • Description: Configures the name of the system contact. The default contact is blank. • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be no more than 20 characters long. Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces. Enclosure network configuration commands 65