HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 98
Set Server Boot Once, Set Server Powerdelay
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades o This command is not applicable to HP Integrity server blades. o This setting is only valid on present blades and cleared if the blade is removed. SET SERVER BOOT ONCE • Command: SET SERVER BOOT ONCE {NORMAL | HDD | PXE | RBSU} {ALL | ]} • Description: o Stores a setting for the IPL to bypass to the servers specified at the next reboot o Sets the boot device to be used on the next boot of the bays specified. • Access level/Bay level: Administrator, operator Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades. o This command is not applicable to HP Integrity server blades. o This setting is valid only on present blades and is cleared if the blade is removed. SET SERVER POWERDELAY • Command: SET SERVER POWERDELAY {ALL | ]} {number of seconds to delay power | NOPOWERON} • Description: Set the PowerDelay status for the specified server or range of servers. If the delay is zero, the delay has no effect on the device. If the delay is NOPOWERON, the device cannot poweron until all devices have completed their delays. • Access level/Bay level: Administrator Bay specific • Restrictions: You must have access to the specified bay number. Blade management commands 98