HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 89
Example, Show Oa Status, Show Oa Usb
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
All • Restrictions: None Example OA-0018FE27577F> SHOW OA NETWORK Onboard Administrator #1 Network Information: Name: OA-1234E2124L7F DHCP: Enabled - Dynamic DNS IP Address: 16.84.190.253 Netmask: 123.456.78.9 Gateway Address: 123.58.36.44 Primary DNS: 12.345.65.78 Secondary DNS: 12.345.67.88 MAC Address: 00:18:FE:27:57:7F Link settings: Forced 100 Mbit - Full Duplex Link Status: Active Enclosure IP Mode: Not Supported SHOW OA STATUS • Command: SHOW OA STATUS [ALL | ]] • Description: Displays health status for the Onboard Administrator. If you do not specify the Onboard Administrator, the command defaults to the Active Onboard Administrator. • Access level/Bay level: All • Restrictions: None Example OA-0018FE27577F> SHOW OA STATUS Onboard Administrator #1 Status: Name: OA-0018FE27577F Role: Active UID: Off Status: OK SHOW OA USB • Command: SHOW OA USB • Description: o Displays which USB controller is currently enabled. o The FRONT controller enables the internal DVD drive and the front USB connector. o The BACK controller enables the two USB ports on the near KVM Option Module. Enclosure management commands 89